DC600M 2.5” SATA Enterprise SSD6Gbps SATA 3.0 storage for mixed-use workloads

Kingston’s DC600M SSD is a fourth-generation data center SATA 3.0, 6Gbps SSD with 3D TLC NAND intended for “mixed use” workloads. The DC600M is suited for use in high-volume rack-mount servers and includes hardware-based on-board PLP. Via power loss capacitors, DC600M protects data against unexpected power failure to reduce the possibility of data loss and ensure that the drive will successfully re-initialise on the next power-up of the system. DC600M is designed to deliver latency and IOPS consistency for system integrators, hyperscale data centers and cloud service providers.

Capacities available from 480GB-7680GB1 to meet your data storage requirements.

• Designed for data center environments
• Hardware-based power loss protection
• Latency and IOPS consistency

Designed for data center environments On-board Power Loss Protection (PLP) Consistent latency and IOPS, reliable QoS Up to 560MB/s read, 530MB/s write Part Number: SEDC600M/1920G

Form factor	2.5 inch
Interface	SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s)
Capacities1	1920GB,
NAND	3D TLC
Sequential Read/Write	1,920GB – 560MBs/530MBs
Steady-state 4k random read/write	1920GB – 94,000/78,000 IOPS
Quality of service (latency)3,4,5(99.999)	Read/Write 480GB – 180/110 uSec 960GB – 3840GB – 200/300 uSec 7680GB – 240/170 uSec
Typical latency - read/write	<200 µs / <30 us3,4,5
Hot-plug capable	Static and dynamic wear levelling
Enterprise SMART tools	Reliability tracking, usage statistics, life remaining, wear levelling, temperature
Hardware-based power loss protection Endurance	1920GB – 3504TBW6, 1 DWPD (5 years)7, 1.66 DWPD
Power consumption	Idle: 1.30W Average: 1.45W Max read: 1.6W Max write: 3.6W
Storage temperature	-40℃ ~ 85℃
Operating temperature	0℃ ~ 70℃
Dimensions	69.9mm x 100mm x 7mm
Weight	92.34g
Vibration operating	2.17G Peak (7–800Hz)
Vibration non-operating	20G peak (10–2000Hz)
MTBF	2 million hours
UBER	≤10 -17